ACCESSORIES
PEGASUS
JUKI
MO-644D
DDL- 8300
DDL 8700
LU-1508
MO-6700
MO-6900
PFAFF
CONSEW
KANSAI SPECIAL
BROTHER
BATTISTELLA STEAM & IRONING
STEAM & CUTTING
USED MACHINES
Specials
JUKI: LU-1508
LU-1508
Serial #: LU-1508N
Quantity:

  • 1 needle Unison feed lockstitch machine
  • Comes with Head only. Complete with oil, thread stand, bobbins, needles, scewdriver, wrench, manual and other extras. For complete assembly with motor and table, please contact our sales representatives for more information
  • New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
  • Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
  • Compared with elliptical feed, rectangular feed helps reduce gathered stitches
  • With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
  • Well tensed seams are consistently produced without pitch errors
  • With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
  • Stitch length can be easily selected by the stitch dial
  • Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large hand-wheel
  • Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter 
  • Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
  • Alternating vertical movement mechanism prevents irregular stitches
  • High 16 mm presser foot lift enables easy material handling
  • Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
  • If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
  • Pressing the reset button will immediately return the machine back to the normal state
  • Maximum stitch length:  9 mm
  • Needle bar stroke:  36 mm
  • Alternating vertical movement:  2.5 mm - 6.5 mm
  • Thread take-up:  slide type
  • Hook:  Vertical-axis, double-capacity hook
  • Needle:  135x17 Nm160
  • Thread:  #30~#5, B46~B138
  • Weight (Head) :  93.7 lbs
  •    Designed and hosted by ICM Consulting